How to Replace the Digital Printing Machine Motor?
As we all know, digital printing is a printing made with digital technology. Moreover, digital printing technology is a high-tech product integrating mechanical and computer electronic information technology with the continuous development of computer technology. The emergence and continuous improvement of this technology has brought a new concept to the textile printing and dyeing industry. Its advanced production principles and means have brought an unprecedented development opportunity for textile printing and dyeing.
Then, digital printing machine motor is an indispensable part of digital printing machine. If there is no motor, the digital printing machine can’t work normally, so when the motor is damaged, it needs to replace the new motor. What is the correct procedure for replacing the digital printing machine? Only the correct replacement of the motor can ensure the normal operation of the machine. Actually, it’s easy to change the digital printing machine motor. Here I will give you some tips about it.
1.Disconnect the power first, then use a screwdriver to disassemble the cover of the digital press.
2.It is necessary to remove the relevant connecting wires of the motor (you should understand how these wires are connected before disassembling, so that you do not connect the wrong one when replacing the new one, which is easy to cause damage to the motor and the main board).
3.Remove the drive belt. Note: Do not use too much force to avoid damage to the motor.
4.Remove the old motor and install a new motor.
Replacing the digital printing machine motor is a total of these four steps, I hope everyone can operate correctly. Need to remind everyone that in the process of disassembling the motor, you only need to use a screwdriver to use this tool. Never use a tool such as a hammer to strike. This is very easy to damage the digital printing machine.
Post time: May-09-2019