Do you think that digital printing production of dark lines will only appear in the process of evaporation? You are wrong because there will be light and dark lines in digital printing. Today we are going to learn how to prevent the light and dark lines in Do you think that digital printing production of dark lines will only appear in the process of evaporation? You are wrong because there will be light and dark lines in digital printing. Today we are going to learn how to prevent the light and dark lines in digital printer.digital printer.

  1. We often say that the digital printing machine nozzle must be maintained in our daily life, because the nozzle is not only an important part of the precision of the internal structure of the digital printer, but also its price is relatively expensive, so the mechanical collision and vibration must be avoided in the process when using the digital printer.

  2. The nozzle of the digital printer is very small, which can be said to be about the same size as the dust in the air, so the dust in the air is easy to plug the nozzle. Therefore, the production environment must be kept clean and clean.

  3. Attention should be paid to the production environment. Digital printer should not work in the high temperature environment, which is easy to rust mechanical parts and nozzle; At the same time, the temperature difference in the working environment is not easy to be too large. If the environmental temperature changes too fast, it will cause the thermal expansion of a large number of engineering plastic parts in the machine, resulting in the wear of mechanical parts, and may cause the change of the size of the fine nozzle aperture, affecting the quality of the product.

  4. Choose high-quality ink cartridge, because inferior ink cartridge, which is easy to lead to nozzle blockage. Serious case will lead to the whole machine production paralysis.

  5. Store the cartridges that are not used for a long time in the ink box to avoid nozzle blockage.

  6. Do not easily remove the nozzle, to avoid damage to the precision parts. If necessary, you can ask professional staff to repair.

  7. If the nozzle is slightly blocked or lacks strokes or colors, or the pattern is blurred under high resolution, it should be cleaned as early as possible with the machine’s own nozzle cleaning program.

  8. It is recommended to choose high-quality and original ink as well as compatible ink. Most people will choose relatively high cost performance compatible ink.

  9. In order for the nozzle to better adapt to the new compatible ink, it is best to completely use up the original ink, add compatible ink for the first time, spray half of it continuously, and then fill the cartridge and place it for a day. Then each time before use to carry out a machine self-test, if the self-test waveform test results are good, then it shows that this compatible ink can be used for a long time. Here it is important to note that it is best to use the same brand after selecting compatible ink.

  From the point of view of 9 ways to prevent the dark and light lines in the drawing of digital printing machine, to put it bluntly, we should do a good job in the daily maintenance of digital printing machine, so as to prevent a series of problems such as broken lines, breakpoints, dark and light lines, blurring and color chaos.